Legacy Amps

10th Anniversary

It’s hard to believe we’ve been manufacturing guitar amps for 10 years. We’ve weathered a recession,(going on two), four moves, and a flood that nearly ended our company. It’s been a bumpy ride, but today Two-Rock is alive and well. And we’re celebrating our 10th year in business by offering an entirely new platform. Combining features of several of our previous models, Our 10th Anniversary Amplifier provides a clean channel with incredible range and plenty of gain on tap. For soloing, our new lead channel design will appeal to guitarists of all styles-from just slightly driven, to mid- gain, soft or aggressive- it’s all here.

The Two-Rock 10th Anniversary 50 watt tube rectified version offers Class A or Class AB operation. The 100 watt version has power settings of 50 or 100 watts. We’ve implemented our PAF(Patent Applied For) Reverb circuit for the first time in a production amp. We’ve eliminated completely the tone loss and clean signal loading found in virtually every other tube reverb circuit in use today.This In addition, there are independent reverb send and return controls for each channel.

The 10th Anniversary also features separate contour controls for both the clean and lead channels. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The Two-Rock 10th Anniversary Limited Edition Package includes:

• 50 watt tube rectified or 100 watt solid state rectified amp head with Two-Rock 10th Anniversary logo
• Matching 2-12 Signature extension cabinet with special signature plate and 10th Anniversary logo
• 12.5’ Crystal-Clear Instrument Cable
• 5’ Crystal-Clear Speaker Cable
• Each amp and cab signed by Bill Krinard and Joe Mloganoski
• Price: $6699
• 2 channel, cascading, SS or tube rectifier, Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
• Footswitchable FET preamp boost with level control, treble, middle, bass, bright, mid, deep, bypass, gain and master each channel, contour control each channel, reverb send and return each channel, 4, 8, 16ohm output
• Triple function LED footswitch for clean/lead, FET boost, and tone bypass
• Accutronics all tube spring reverb with send and return controls.
• Special design transformers, individually selected components.
• Dimensions: 20.5″ L x 10″ D x 12″ H / Weight: 42 Lbs for 50 watt and 49 Lbs for 100 watt.
• Tube complement: 4 x 12AX7, 1 x 12AT7, 2 x 6L6GC, 2 x GZ34 (50 watt model)
• Tube complement: 4 x 12AX7, 1 x 12AT7, 4 x 6L6GC (100 watt model)
• Also available: head only, no signatures, $5500 at 50watts w/ solid state rectifier, / $6000 at 100watts. Standard cabinet is black tolex.
• Custom covering available at additional cost.

10th Anniversary J-2

We are pleased to introduce the arrival of the J-2, which is built on the extremely popular Jet Signature Platform with a new design incorporating the feeling and dynamics of the 50 and 100 watt 10th Anniversary amps-complete with extended response, new Reverb circuit, separate masters and a more modern Tone.

Joe Mloganoski, co-owner of K& M Analog Designs (Two-Rock’s parent company) explains “During the last 5 months of this 10th anniversary year, here at Two-Rock we have been working on 2 amps that best signify the last 10 years. We’ve sold out of our limited run of 50 10th Anniversary packages for our 100 and 50 Watt heads, sold with a matching 2×12 Cabinet, a speaker cable, and instrument cable. We have now moved into the full production stages of this amp and we have moved on to our new package deal for the 10th Anniversary J-2.”

The two packages offered for the 10th Anniversary are:

J-2 40 watt (2x6L6) Head, 1-12 extension cab, matching serial #s and special 10th
Anniversary logos
*includes instrument cable, speaker cable, certificate of authenticity, manual, footswitch,
power cable, 10th Anniversary commemorative t-shirt and hat

J-2 40 watt (2x6L6) 1-12 combo and special 10th
Anniversary logo
*Includes instrument cable, certificate of authenticity, manual, footswitch, power cable,
10th Anniversary commemorative t-shirt and hat.

Features include:
• Push pull boosts for Treble, Mid and Bass
• Push Pull to switch from clean and lead (foot switchable)
• Push Pull switch on the gain knob for the tone bypass (foot switchable)
• Contour control
• Reverb Drive control
• The ever popular post OD tone stack (HRM Circuit)
• 4, 8 and 16 OHM Speaker Outputs
• 40 Watts 6L6 or 30 Watts 6V6

Quick Facts:

• 15″ wide x 18″ tall x 10″ deep Only 30lbs.
• For combo, 12-65R or TR65 speaker.
• Head Dimensions: 15″ L x 10″ H x 10″ D / Weight: 29 lbs.
• Combo Dimensions: 15″ L x 18″ H x 10″ D / Weight: 39 lbs.

Akoya

After consulting with numerous artists, Bill Krinard set out to develop an amp that would deliver Two-Rock performance and the feel of a vintage amp – all in one amp. What he and his team developed is a fully adjustable Two-Rock front-end with the feel and forgiveness of a classic blackface amplifier. This tone should be familiar to nearly every guitar player, yet has the refinements of a Two-Rock.

Amethyst

50 Watt Combo version of the Emerald

Bi-Onyx

Designed to give dual channel players a new and greater degree of control, in any performance environment and for any style of music. Featuring independent controls for clean and lead; including EQ, gain, master, reverb, contour and volume boost. Avail in 50W & 100W head options with stock EL34s (optional 6L6s), foot-switchable channel selection and volume boost, a newly designed output transformer that delivers a tighter low-end and a broader range of highs and mids, and a new speaker output feature that enables multiple cabs to be in use at the same time.

50 Watt Specs:

Output Power: 50W

Tubes: EL34

Reverb: Analog Spring Reverb

Dimensions: 20 1/2″ wide x 12″ tall x 10″ deep

Weight: 42 Pounds

Features: Rear panel tube switch (EL34 to 6L6), Precision Power Supply, Passive loop insertion point between preamp and power stage, 4, 8 and 16 ohm outputs with parallel output option on 4 and 8 ohm outputs, Volume boost on clean and lead – foot switchable

100 Watt Specs:

Output Power: 100W

Tubes: 6L6

Reverb: Analog Spring Reverb

Dimensions: 20 1/2″ wide x 12″ tall x 10″ deep

Weight: 43 Pounds

Features: Rear panel tube switch (EL34 to 6L6), Precision Power Supply, Passive loop insertion point between preamp and power stage, 4, 8 and 16 ohm outputs with parallel output option on 4 and 8 ohm outputs, Volume boost on clean and lead – foot switchable

Cardiff

Have you ever wanted an EL84 amp with less compression, fuller/fatter midrange, and stout low end? The perfect marriage of British heritage and Two-Rock perfomance engineering delivers chime, grind and girth without compromise.

Low EQ, Hi EQ, Volume and Contour are easy to use and every setting delivers another inspiring tone and performance.

Output Power: 15W Head
Power Tubes: 2x EL84
Pre-amp Tubes: 2x 12ax7
Loop: Passive Loop Effects
Channels: Single Channel

FEATURES
– High and Low EQ controls
– Volume control
– Contour Control

Classic Reverb (2007-2016)

The latest edition to the Classic Series is the Classic Reverb. Using the Sterling Signature and John Mayer Signature amps as our guide, we’ve added a few features to enable the guitarist to tailor his clean from super squeaky hi-fi clean all the way to edgy, medium distortion. We’ve purposely tweaked the input stages to enhance distortion pedal performance. A sophisticated all tube spring reverb is included, featuring 3 voicings, plus individual send and return controls. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.The additional tone shaping features include a footswitchable FET preamp stage, 3 way preamp (negative) feedback switch, and 3 way output section (negative) feedback switch. The preamp switch offers zero feedback, Custom Reverb feedback level, and ultra hi feedback levels for high output or active pickup optimization. In addition, the output stage can be tailored via a 3 way feedback switch to make the power stage tighter, looser, or more open and responsive.

For more info on the Classic Reverb’s development, see the Classic page.

Quick Facts:

• Single channel, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
• 100 watt-50/100 watt switch
• 50 watt- class A/AB (22/50 watt)switch
• Footswitchable FET preamp stage with level control, treble, middle, bass, bright, mid, deep, dual EQ settings, gain and master, contour control. 4, 8, 16 ohm output
• Triple function LED footswitch for FET, tone bypass and Reverb Defeat
• 3 way preamp(negative) feedback switch, and 3 way output section(negative) feedback switch
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 40 Lbs for 50 watt and 48 Lbs for 100 watt.
• Price: $5000 at 50watts / $5500 at 100watts. Standard cabinet is black tolex. Custom covering available at additional cost

Classic Type 1

The Classic Type 1 speaks with authority. All equalization, tone shaping, sag, and other parameters were chosen by us personally. With strong elements of the Kimock Signature present, seasoned Two-Rock veterans will be fondly remembering the original K&M Custom and Emerald Pro, among others. Even more proprietary components have been added to the list of parts made exclusively for us to continually improve our amps. The lead channel features an externally adjustable input gain trim control, allowing the player to select smooth overdriven tones or add more attack and bite if desired. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The Classic features Preamp Out and Power Amp In jacks, and does not have an internal buffered loop. Additional tone shaping features include a footswitchable FET preamp stage, 3 way preamp (negative) feedback switch, and 3 way output section (negative) feedback switch. The preamp switch offers zero feedback, CR feedback level, and ultra hi feedback levels for high output or active pickup optimization. In addition, the output stage can be tailored via a 3 way feedback switch to make the power stage tighter, looser, or more open and responsive.

Classic Type 1 Quick Facts:

• 2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
• Footswitchable FET preamp stage with level control, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain, master for each channel, and contour control. 4, 8, 16 ohm output
• Dual function LED footswitch for clean/lead and tone bypass
• 3 way preamp(negative) feedback switch, and 3 way output section (negative) feedback switch
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 40 Lbs for 50 watt and 48 Lbs for 100 watt.
• Standard cabinet is black tolex. Custom covering available at additional cost
• Price: $5000 at 50watts / $5500 at 100watts.

Classic Type 2

The Classic Type 2 offers a unique approach to the “two amps in one box” concept. Seasoned Two-Rock veterans will be fondly remembering the Opal and Emerald Pro, as the Type 2 offers internal EQ dedicated to the lead channel only.

This feature allows the individual to tailor the lead channel for a variety of pickup/guitar combinations, and truly create completely different clean and lead tones.The lead channel also features an externally adjustable input gain trim control, allowing the player to select smooth overdriven tones or add more attack and bite if desired. A pair of contour controls have been added, independently offering a broad EQ sweep of both clean and lead modes. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The Classic Type 2 features Preamp Out and Power Amp In jacks, and does not have an internal buffered loop. Additional tone shaping features include a footswitchable FET preamp stage, and 3 way output section (negative) feedback switch. The output stage can be tailored via a 3 way feedback switch to make the power stage tighter, looser, or more open and responsive.

Classic Type 2 Quick Facts:

• 2 channel, cascading, SS Rectifier, 2 X 6L6or EL34, 50 watts or 4 X 6L6 or EL34, 100 watts.
• Footswitchable FET preamp stage with level control, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, clean and lead contour control. 4, 8, 16 ohm output
• Dual function LED footswitch for clean/lead and tone bypass
• Internal post overdrive tone controls, user adjustable
• 3 way output section (negative) feedback switch
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 40 Lbs for 50 watt and 48 Lbs for 100 watt.
• Standard cabinet is black tolex. Custom covering available at additional cost
• Price: $5000 at 50watts / $5500 at 100watts.

Classic Type 3

The Classic Type 3 derives its soft, organic feel, response and articulation from a pair of GZ34 tube rectifiers.In addition, the 2 x 6L6 output section can operate in either Class A or A/B, further enhancing the characteristics provided by the power supply.

The lead channel features an externally adjustable input gain trim control, allowing the player to select smooth overdriven tones or add more attack and bite if desired. A pair of contour controls have been added, independently offering a broad EQ sweep of both clean and lead modes. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The Classic Type 3 features Preamp Out and Power Amp In jacks, and does not have an internal buffered loop. Additional tone shaping features include a footswitchable FET preamp stage, 3 way preamp (negative) feedback switch, and 3 way output section (negative) feedback switch. The preamp switch offers zero feedback, CR feedback level, and ultra hi feedback levels for high output or active pickup optimization. In addition, the output stage can be tailored via a 3 way feedback switch to make the power stage tighter, looser, or more open and responsive.

Classic Type 3 Quick Facts:

• 2 channel, cascading, dual tube rectifier2xGZ34/5AR4, 2 X 6L6, 50 watts
• Class A or Class A/B operation, switchable
• Footswitchable FET preamp stage with level control, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master for each channel, and clean and lead contour control. 4, 8, 16 ohm output
• Dual function LED footswitch for clean/lead and tone bypass
• 3 way preamp(negative) feedback switch, and 3 way output section (negative) feedback switch
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 40 Lbs
• Standard cabinet is black tolex. Custom covering available at additional cost
• 50 Watt Only

Coral

The Coral builds on the Two-Rock history as a versatile two-channel amp with a shared EQ and a cascading gain structure for professional-level dynamic control, rich harmonic tones and full bass response. Add a classic Two-Rock reverb with an improved signal to noise ratio and post master circuit, along with a versatile EQ section for extensive tonal shaping. Available as a 50W 1×12 combo or 50W head and 100W head, the Coral takes Two-Rock’s amplifier platform to new levels.

– Dual channel amp with shared EQ and cascading gain
– Treble, Middle, Bass EQ controls
– Treble, Middle & Bass boost switches plus EQ shift switch
– Clean Gain & Volume; Overdrive Gain & Volume controls (cascading)
– Presence control
– Bypass and Overdrive foot switch control
– Cathode / Fixed Bias switch

Crystal

Two-Rock’s Crystal provides a dynamic clean platform with rich harmonic tones and superior dynamic control. Available as a 100W head with 6L6s or 40W combo with 6V6s, the single-channel Crystal turns tone tweaking into pure pleasure.

• 100 Watt 6L6 Head or 40 Watt 6V6 Combo
• Contour, Gain and Master with “pull” bright on the Gain control
• Famed TR reverb Send and Return Controls
• Passive Effects Loop
• 4 ohm; 8 ohm, 16 ohm Speaker Outputs
• 12” Celestion Gold Alnico on combo versions
• Single Channel – Clean
• Head: 20 5/8″ wide x 10 1/2″ tall x 11″ deep 45 LBS
• Combo: 20 5/8″ wide x 22″ tall x 11″ deep 59 LBS
• Available in Carbon Fiber tolex, silver/gold grill cloth, metal dress bar

Custom Clean

For those demanding the ultimate clean platform with a wide spectrum of EQ, power, and tonal settings, we’ve introduced our Custom Clean amplifier. Available with power scaling in 50, 100, or 150 watt models, the CC features FET boost, full tone controls with deep, mid, and bright switches, hi/lo cut filters, superb spring reverb with drive and mix controls, and clean to mean gain structure. We’ve boiled down 10 years of clean amp R&D into this unique package, creating a remarkable tool for artists requiring one amp to cover all the bases when it comes to CLEAN!

Custom Clean Quick Facts:

• Single channel, SS Rectifier, 2 X 6L6, 50 watts, 4 X 6L6, 100 watts, or 4X 6550, 150 watts.
• Footswitchable FET preamp stage with level control, treble, middle, bass, bright, mid, deep, dual EQ settings, Hi and Low filter cuts, Reverb send and return, gain, master, and contour control. 4, 8, 16 ohm output
• Dual function LED footswitch for FET and tone bypass
• Dimensions: 24″ L x 10″ D x 12″ H / Weight: 48 Lbs for 50 watt, 52 Lbs for 100 watt, 54 Lbs. 150 watt.
• Standard cabinet is black tolex. Custom covering available at additional cost
• Price: $7000 at 50watts / $7500 at 100watts/$8000 150 watts

Custom Reverb Artist

50 Watt Head shown; also available in a 1-12 combo.

Available with 2X6V6(22 watts) , 2x6L6(50 watts) or 4X6L6 (100 watts)

The Custom Reverb ARTIST takes our popular Custom Reverb format to the next level. All of the features of the original Custom Reverb, with an enhanced reverb and effects loop circuit and a few tricks passed down from our Signature Series Custom Reverb.This amp is exceptionally sweet, with a super chimey clean channel, and an overdrive that’s controlled, open, and when pushed can get some edge-while maintaining clarity and note seperation. This is the ultimate hand-wired two channel amp for the working musician, offering exceptional performance, features, and a 5 year warranty for under $4000- Including a matching Two-Rock 1-12 speaker cabinet!! Contact any Two-Rock dealer for details. THIS IS A LIMITED TIME OFFER!

Custom Reverb Signature V1

The Custom Reverb Signature is the culmination of everything Bill & Joe have learned since day one. It has a lot of the same features from their early days building amplifiers. The CR Sig has a very refined lead channel that has been tweaked to perfection. Originating in the K&M Custom, this circuit is the most open, least compressed and most articulate and revealing. The Signature also features a dual mode power supply which allows for either 35 watt or 50 watt operation(70/100 watts in the 100 watt version). It has a separate isolated power supply for the reverb, which enhances the reverb effect and prevents loading of the dry signal. In conjunction with our other reverb innovations, you’ll immediately notice a rounder, warmer, less restrictive feel.

The version 2 of the Custom Reverb Signature features further refinements. More proprietary components have been added to the list of parts made exclusively for us to continually improve our amps. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The effects return level is now internally fixed and there is a reverb send control on the back, similar to the Overdrive Signature. The beauty of this is you can control the amount of signal that goes to the reverb tank, allowing you to go from short to long decay times. The return control(front panel) adds just the right amount of total effect, from subtle to surf.

Finally, the output transformer has also been redesigned. The Custom Reverb Signature V2 has a much wider bandwidth, which along with our refined circuitry and component choices, translates into more articulation, feel, chime, and musicality than ever before.

Quick Facts:

• 2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
• 4, 8, 16 ohm output, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, contour control.
• Dual function LED footswitch for clean/lead and tone bypass.
• Accutronics all tube spring reverb with send and return controls.
• Buffered effects loop.
• Special design transformers, individually selected components, each amp signed by Bill Krinard and Joe Mloganoski personally.
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 41 Lbs for 50 watt and 49 Lbs for 100 watt.
• Price: $5500 at 50watts / $6000 at 100watts. Standard cabinet is black tolex. Custom covering available at additional cost.

Custom Reverb Signature V2

The Custom Reverb Signature is the culmination of everything Bill & Joe have learned since day one. It has a lot of the same features from their early days building amplifiers. The CR Sig has a very refined lead channel that has been tweaked to perfection. Originating in the K&M; Custom, this circuit is the most open, least compressed and most articulate and revealing. The Signature also features a dual mode power supply which allows for either 35 watt or 50 watt operation(70/100 watts in the 100 watt version). It has a separate isolated power supply for the reverb, which enhances the reverb effect and prevents loading of the dry signal. In conjunction with our other reverb innovations, you’ll immediately notice a rounder, warmer, less restrictive feel.

The version 2 of the Custom Reverb Signature features further refinements. More proprietary components have been added to the list of parts made exclusively for us to continually improve our amps. The presence control has been eliminated and a contour control has been added. At the twelve o’clock position, the amp’s frequency response is flat. Rotating the knob counter-clockwise, will decrease the highs and increase the lows, and vice-versa for clockwise movement. This is ideal for switching between single coils and humbuckers without touching other controls or compensating for different speaker cabinets. It’s also a great way to compensate for room acoustics without changing your entire preamp EQ.

The effects return level is now internally fixed and there is a reverb send control on the back, similar to the Overdrive Signature. The beauty of this is you can control the amount of signal that goes to the reverb tank, allowing you to go from short to long decay times. The return control(front panel) adds just the right amount of total effect, from subtle to surf.

Finally, the output transformer has also been redesigned. The Custom Reverb Signature V2 has a much wider bandwidth, which along with our refined circuitry and component choices, translates into more articulation, feel, chime, and musicality than ever before.

Quick Facts:

2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts or 4 X 6L6, 100 watts.
4, 8, 16 ohm output, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, contour control.
Dual function LED footswitch for clean/lead and tone bypass.
Accutronics all tube spring reverb with send and return controls.
Buffered effects loop.
Special design transformers, individually selected components, each amp signed by Bill Krinard and Joe Mloganoski personally.
Dimensions: 20″ L x 10″ D x 12″ H / Weight: 41 Lbs for 50 watt and 49 Lbs for 100 watt.
Price: $5000 at 50watts / $5500 at 100watts. Standard cabinet is black tolex. Custom covering available at additional cost.

Custom Reverb Signature V3

The amp is based on the same platform as the previous versions, but we’ve added some new features to increase the amp’s flexibility. We’ve added an active loop with a “Return Level” and “Pull Bright” function.. Also, you’ll enjoy the dual contours and the ability to order with 6L6’s or EL34’s. The “Pull Mid Defeat” will allow you to scoop the mids, giving the amp a more “fender” style front end.

Emerald 50

From a versatility standpoint this amp is nearly unmatched by anything else that I have played through. The clean tones are beautiful and varied, and the lead channel is my Nirvana. Not the band mind you, but the blissful state one finds ones self in when the tone is just RIGHT, every time you plug in. I play rock music….remember that genre kids? The amp works for my style of playing better than anything else that I have ever owned or tried.

This is a two channel amp with channel swithing. There are the familier tone controls Bass, Mid, Treble, and presence, but there are also some other tonal options to be had. The amp has a deep switch that adds additional lows and warmth, as well as a bright switch. The extra goodies that I love are the dual eq mode switch, which adds an additional tonal voice to the amp, as well as the EQ defeat which is footswitchable and adds a wonderful lead boost. My all time favorite is the negative feedback loop switch which removes the loop from the amp. BIG thick lead tones is what you will get from this puppy! I leave this switch in the negative feedback loop out position almost exclusively!

Emerald Pro

As with most of the other Two Rock amps this amp is equiped with two 6L6’s. It is the loudest 50 watt amp that I have ever heard. The amp does sound amazing at lower volumes as well. There is an effects loop that can be used in series or parallel. The parallel loop is a bit more tidy in the way that it truly seems to seperate the effects in the loop from the dry guitar tone. There is a heavy duty footswitch provided with the amp that has two switches, one for channel selection, the other for the eq defeat switch. ALL TUBE, big tones, no regrets. Everything from black face to Dumble and all points in between. Did I mention the reverb? BIG!

Emerald ProThe amps noise floor is nearly non-existant, meaning, no buzzes, or ocean sounds kids. As I stated before, the clean channel is black face heaven, but can get as gainy as a bassman if need be. It is thick, rich and dynamic. The lead tone is where the fun begins for me. Huge tones. Big Dumble like girth, but with it’s own voice. There are so many great tones in this amp. Even at extreme gain settings you may control the amp with your right hand picking attack and slight guitar volume changes. Rich Bell like tones ring out of this beast.

The gain channel is so rich and dynamic with so much sustain that I basically sold every pedal on my board that used to provide me with gain tones, and am down to a wawa, a voodoo vibe and a TC 2290 in the loop for a little delay. REALISM. Every boutique amp that I have ever played through that was a dual, or multi-channel amp just sounded FAKE. What am I talking about? Well, have you ever used one of these “boutique” amps at a high gain setting and realized that your tele sounds the same through the amp as say your les paul? Or that you roll off your guitar volume and get mush? Or you pick slightly softer and nothing changes? WELL, that is why DUMBLES sell for 10K. Few if any amp makers capture that magic that is the interaction between the player, the guitar and the amp.

The guys at K and M have done it in spades. If you are looking for an amp to hide behind tonally, this is not it. Go buy something else. If you want an amp that becomes part of your creative link, that is as important to your performance as your favorite guitar, or your left hand, then buy one of these now. Expensive….yes. Are the worth it…..yes again! I have tried, and owned a lot of amplifiers, most of them for a very brief amount of time. I own a Two Rock amethyst, and now a Emerald Pro, and I will not be without this amp ever. By the way, the Two rock amps sound killer with the Two Rock 2-12 cabinet with Fane alnico 100’s. Not enough? Run the amp through an old Marshall cabinet! Killer tones, lots of options, brings out the voice of each guitar that you own.

Emerald Pro

One of the first production Two-Rock amplifiers built. 2000-2002 approx.

Eric Gales Signature

We’ve developed a clean to mean tone machine with Eric Gales – see the video HERE

This 2 channel no frills amp has stellar crystal cleans and high gain lead tones, with a separate EQ on the front panel for lead and clean.

Product Specs

• EL34 Tube Rectified 50 Watt or 100 Watt solid state rectified
• No FX loop
• No Reverb
• PODS (Post OD Tonestack) with controls on the front panel
• Precision style power supply
• Available in standard black or blond tolex
• $5000 Retail
• ONLY 50 Available

EXO-15

“How do we deliver legendary Two-Rock cleans with dirty versatility in a streamlined, low wattage package?” That was the challenge faced by Two-Rock.

We thus focused long and hard on the amp exoskeleton. We saw that if we gutted the middle and located all the performance elements at the top and bottom of the chassis we could achieve a uniquely streamlined, high performance look, feel and footprint.

The result is the EXO 15 6V6, tube rectified, class AB amp. In its sleek, exoskeleton designed all-metal chassis this 15 Watt amp gives you peerless Two-Rock cleans with plenty of dirty versatility. Treble, Mid, and Bass controls allow for classic Two-Rock tone shaping while the Gain and Master controls supply just the right amount of clean to dirty ratios. The Contour control was added for extra global frequency shaping. We added pedals to the front input of the amp for even more versatility. Pre Amp Out and Power Amp In jacks on the rear of the amp give you a passive loop for time based effects. 4, 8,and 16 OHM jacks allow you to connect to the EXO 1×12 speaker cab or any cab of your choice.

Output Power: 15W

Tubes: 2 x 6V6, 5AR4 rectifier tube, 2 x 12AX7

Dimensions: 12″ wide x 7″ tall x 8″ deep

Weight: 13.5 Pounds

Features: Treble, Mid and Bass Tone Stack, Passive Effects Loop – Pre-amp in, Power-amp out,Contour, 4, 8 and 16 ohm speaker outputs, Lit controls on front panel

Gain Master

The Gain Master is our newest model this year.  Simply a mini version of the TS-1, the Gain Master has superb tone control, articulate clean and lead channels, no reverb circuit, and a passive loop.  This dual channel amp has all the characteristics of some of the most sought after amps in history.

Touch sensitivity plays a huge role with this amp and time after time, it will not dissapoint.  Features of this amp are basic to bring out the guitar and the player.

Product Specs:

Gain Master 22

• 22 Watt 6V6 ONLY
• Pull Bright control
• Bypass and Lead switching by foot switch only
• Passive Effects Loop
• No Reverb
• Small chassis design
• Available in head or combo
• Head dimensions 15″ L x 10″ H x 10″ D / Weight: 29 lbs
• Combo dimensions 15″ L x 18″ H x 10″ D / Weight: 39 lbs
• Available in Black or Blond tolex

Gain Master 35

• 35 Watts 6L6 ONLY
• Pull bright/mid/deep controls
• Pull Bypass and Lead on front of chassis and foot switch
• Passive Effects Loop
• No Reverb
• Small chassis design
• Available in head or combo
• Head dimensions 15″ L x 10″ H x 10″ D / Weight: 29 lbs
• Combo dimensions 15″ L x 18″ H x 10″ D / Weight: 39 lbs
• Available in Black or Blond tolex

Jade

The JADE has arrived-PCB design, 3 channels, independent EQs, loop, reverb, direct out, global master…An extremely versatile, compact tone machine for those who want signature Two-Rock cleans, that elusive touch sensitive singing lead voice, plus the addition of over the top lead gain for a modern twist! Available in 22, 50, and 100 watts, and as a 1-12 combo with our new Two-Rock Special Design 12 or Jensen Neo. The Neo-equipped 50 watt combo weighs just 46 lbs!.

Jet

Love the Two-Rock tone but don’t play for 20,000 people every night? Or maybe you’re looking for a great studio amp? In either situation, the Jet is right for you. The Jet has been specifically designed to produce killer Two-Rock tone at a lower volume than any other amps in the line.

It can produce 20 watts through 2 6v6’s or 35 watts through 2 6L6’s. The Jet has a Custom Reverb Type circuit, but is more basic in features. It does not include the deep, mid and bright switches, the EQ1, EQ2 switch or a channel switch on the chassis. Instead, it offers the basic EQ settings of bass, mid & treble and it is closer to the EQ2 in voicing. Channel switching and tone stack bypass are handled through the footswitch. Same great CR Artist serial effects loop, and same all tube spring reverb.

The Jet is available in either a 1×12 combo, available with your choice of TR12-65 or the new TR12-65R speaker, or as a stand alone head (black or blonde only) for use with a separate cab. The Jet combo comes in a blonde or black cabinet with a Two-Rock grill badge.

Quick Facts:

• 15″ wide x 18″ tall x 10″ deep Only 30lbs.
• Available in standard head, 1×12 Combo, and 2×10 Combo.
• 2x6v6 for 20 watts or 2x6L6 for 35 watts.
• For combo, Tonespotter or TR65 speaker.
• Head Dimensions: 15″ L x 10″ H x 10″ D / Weight: 29 lbs.
• Combo Dimensions: 15″ L x 18″ H x 10″ D / Weight: 39 lbs.
• Price: $3500 1-12 combo, $3300 head.

Jet 22/35

JET 22

A peerless small venue or studio amp, specifically designed to deliver killer Two-Rock tone at a lower volume than any other series in the line. It can produce 22W through 2 6v6’s or 35W through 2 6L6’s. The Jet 22 and 35 have a Custom Reverb-type circuit but are more basic in their features. The Jet does not include the EQ1/EQ2 switch and has a simpler feature layout than the CR V3. It offers the basic EQ settings – bass, mid & treble – and it is closer to the EQ2 or the CR Sig in voicing. Same serial effects loop as the Custom Reverb, and same all-tube spring reverb.

The Jet 22 has a pull bright feature and the channel switching is available throught the foot switch. Reverb drive is set internally at the factory, but can be adjusted by removing the chassis by qualified technicians.

Output Power: 22W

Tubes: 6V6 ONLY

Footswitch: Lead and Bypass (FS only)

Reverb: Tube Driven, Analog Spring Reverb

Dimensions: 15-3/4″ wide x 10-1/4″ tall x 10″ deep

Weight: 22 Pounds

Features: Pull Bright Control, Series Loop

JET 35

A peerless small venue or studio amp, specifically designed to deliver killer Two-Rock tone at a lower volume than any other series in the line. It can produce 22W through 2 6v6’s or 35W through 2 6L6’s. The Jet 22 and 35 have a Custom Reverb-type circuit but are more basic in their features. The Jet does not include the EQ1/EQ2 switch and has a simpler feature layout than the CR V3. It offers the basic EQ settings – bass, mid & treble – and it is closer to the EQ2 or the CR Sig in voicing. Same serial effects loop as the Custom Reverb, and same all-tube spring reverb.

The Jet 35 has a pull bright, mid and deep boost, as well as the bypass and lead switches availble by a “pull” pot on the front of the amp. Reverb drive control is located on the back of the chassis.

Output Power: 35W

Tubes: 6L6

Footswitch: Lead and Bypass

Reverb: Tube Driven, Analog Spring Reverb

Dimensions: 15-3/4″ wide x 10-1/4″ tall x 10″ deep

Weight: 22 Pounds

Features: Pull Bright, Mid, and Bass Controls, Series Loop

Jet 50/100

The Jet 50 has a pull bright, mid and deep boost, as well as the bypass and lead switches availble by a “pull” pot on the front of the amp. Reverb drive control is located on the back of the chassis.

The Jet 100 has a pull bright, mid and deep boost, as well as the bypass and lead switches availble by a “pull” pot on the front of the amp. Reverb drive control is located on the back of the chassis.

Jet Signature

The Jet Signature neatly fills the gap between the standard Jet and the Custom Reverb Signature. Love the Two-Rock tone but don’t play for 20,000 people every night? Or maybe you’re looking for a great studio amp? In either situation, the Jet Sig is right at home. The Jet Signature has been specifically designed to produce killer Two-Rock tone at a lower volume, yet still offers fine tuning features not found on some other “grab and go” amps.

It can produce 20 watts through 2 6v6’s or 35 watts through 2 6L6’s. The Jet has a Custom Reverb Signature type circuit and components, and includes the bright, mid, and deep switches not found on the standard Jet. Channel switching and tone stack bypass are handled through the footswitch. The Jet Sig also contains the enhanced reverb circuit found on the Custom Reverb Signature, with seperate send and return controls.The Jet Sig also comes equipped with a larger, new design output transformer, boosting clarity and clean headroom without losing the low volume sponginess and feel so useful for recording and small venue performances.

The Jet Signature is available in either a 1×12 combo, available with your choice of TR12-65 or the new TR12-65R speaker, or as a stand alone head (black or blonde only) for use with a separate cab. The Jet combo comes in a blue, blonde or black cabinet with a Two-Rock grill badge. Available this fall is the JUMBO JET, stay tuned for details.

Quick Facts:

• 15″ wide x 18″ tall x 10″ deep Only 30lbs.
• Available in standard head, 1×12 Combo, and 2×10 Combo.
• 2x6v6 for 20 watts or 2x6L6 for 35 watts.
• For combo, 12-65R or TR65 speaker.
• Head Dimensions: 15″ L x 10″ H x 10″ D / Weight: 29 lbs.
• Combo Dimensions: 15″ L x 18″ H x 10″ D / Weight: 39 lbs.
• Price: $4500 1-12 combo, $4000 head.

John Mayer Signature

We are proud to introduce what we humbly consider to be another benchmark amplifier, designed and perfected in collaboration with John Mayer. John has been touring and recording with Two-Rock amps since early 2005, and it was only natural for us to join forces and build him an amp that would meet his specific needs. Based on our Custom Reverb Signature amp, the John Mayer Signature amp is 100 watt, single channel amp with incredible depth, bandwidth, and soundstage.

We have added elements of the Sterling Signature, Overdrive Signature, and Kimock Signature amps to produce pristine cleans with rich harmonics, as well as a sophisticated all tube spring reverb circuit, tuned to John’s ear. We’ve moved the gain and master controls to the far right side of the front panel, separate from the tone controls and reverb, to allow quick adjustment on the fly.A contour control has been added, allowing global fine tuning of overall output EQ. And we’ve finished each unit in gun metal gray carbon fiber covering, black cane grill cloth, and silver piping. Each amp is individually signed by John, and is shipped road-ready in a Calzone road case. Only 25 of these amps will be available.

Quick Facts:

• Gun Metal Gray Carbon Fiber Covering
• Black Cane Grill with Silver Piping
• 100 watts, single channel, 4X6L6
• 4, 8, 16 ohm outputs
• Controls: Treble, Middle, Bass, Bright, Mid, and Deep switches, Reverb Send and Return, Gain, Master, and Contour
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 48 Lbs.
• Price: $8500

K&M Custom

The Custom is our incredibly toneful, dynamic short chassis non-reverb entry. Like the Opal and Topaz, the Custom has 2 channels and 6L6 outputs. The difference lies in the circuitry-a super sweet and creamy response that reveals every soulful nuance of your individual style. Available with or without a buffered effects loop, in 50 or 100 watts.Featuring a somewhat less “stiff” power supply than the Opal and Topaz, the Custom has the ability to create fantastic singing, chimey clean and lead tones at any volume with just the right amount of “give” and compression.

Kimock Signature

Once dubbed the “The High Priest of Magical Guitar Tone,” Steve Kimock has teamed up with Bill Krinard to develop the Kimock Signature Amplifier. This incredible tone machine contains a mix of new, old, out of production, and custom components each individually chosen to produce the most toneful, responsive, articulate and musically inspiring Two-Rock amp to date. All told, many hours of research (not including Bill and Steve’s previous experience & collaboration, this is just the parts swapping/listening aspect of the project) went into this amp. As luck would have it, the components chosen include several pieces which are difficult, if not impossible, to find, anywhere. Hence, only 25 units will be available due to parts scarcity.

A friendly, easy to play amp that has an organic feel, hard to quantify in words, but sounds like a great, broken in, harmonically rich amplifier. The Kimock Signature has an incredible lead channel that is very responsive without being compressed or mushy.

Quick Facts:

• 2 channel, cascading, SS Rectifier, 2 X 6L6, 50 watts.
• 4, 8, 16 ohm output, FET input (foot switchable), treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel.
• Special design transformers, individually selected components, each amp signed off by Steve Kimock personally.
• Dimensions: 20″ L x 10″ D x 12″ H / Weight: 41 Lbs.
• Price: $9000 Custom covering shown available at additional cost. Standard cabinet is black tolex.

LTD

The K&M; LTD amplifier-This amp is based on our 2 channel platform, with the following features: FRONT PANEL – Treble, mid, bass controls, clean gain, clean master, lead gain, lead master, reverb, presence. Clean bright and deep switches, mid boost is assignable to either clean or lead channel. Dual mode EQ, tone bypass, and clean/lead selector. Treble, middle, and bass controls on rear panel for lead channel. Effects loop with return level control and loop bypass switch. Power Section- the power section is unique on the LTD. It will accept 6V6, 6L6, or EL34 output tubes in cathode biased (Class A) mode for power levels of 12- 30 watts. In class A/B, power levels of up to 45 watts are available. In addition, a high/low power 3 position standby switch allows 2 power levels in either mode. This extremely versatile package is great for low volume rehearsal, recording, etc., yet can still provide plenty of clean headroom for larger venues!

Matt Schofield Signature

A signature amp specially designed for guitar virtuoso and British Blues Awards Guitarist of the Year Matt Schofield, who has relied on Two-Rock amps for several years (the Classic Reverb and later the Studio Pro as well). Introduced to much acclaim at the 2012 NAMM Show and now one of Two-Rock’s best-selling models.

Output Power: 50W

Tubes: 2 x SED Winged C 6L6

Rectifier: Dual Tube 5AR4

Dimensions: 20″ wide x 12″ tall x 10″ deep

Weight: 40 Pounds

Features: Treble, Mid, and Bass tone stack with boosts, Wide adjustable mid from defeat to full on, Adjustable front end voicing from “Traditional” to “Two-Rock”, Tube tremolo with speed and intensity controls, Reverb Send and Return controls, Traditional Presence control, Internal Bypass adjustment (set from factory), Signed chassis by Matt Schofield, Signed photo of Matt Schofield, Signed Matt Schofield CD

Onyx

The Onyx is our first amp to offer completely independent clean and lead EQ-from the front panel. The clean channel has incredible depth and chime, and you can dial in a variety of clean tones at ease. Once you’ve found your favorite clean, move to lead- and get mid boosted, bright, deep, scooped- whatever! And the gain available can range from the slight edge blues players crave, to high gain rock. In addition, independent reverb and presence controls allow further tailoring, and an adjustable boost feature is footswitchable and operates on either channel! Available in 50 or 100 watts.

Opal

The Opal is the most revealing instrument in the Two-Rock family. This amp is extremely dynamic, featuring a very fast response, incredible touch sensitivity, and famous Two-Rock tonal versatility for the discriminating artist and weekend warrior/tone freak alike! The dual-mode lead channel offers 2 independent lead voicings, offering the slightly more compressed lead tone(eq adjustments internal) of our classic Two-Rock amps, as well as the more open singing lead of the Custom.

It all started when K&M was invited to a boutique amp shootout in Northern California earlier this year. We brought two amps. One was our production line Emerald Pro along with a new prototype Bill Krinard (our never stop energizer designer) built from scratch on a short aluminum chassis affectionately referred to as The “Wood” Amp. The name is in reference to its enclosure, which is a cabinet grade, finger jointed, figured maple head cabinet, and for its refined organic tone. Different Tubes, different design, just different enough to blow everyone away! We were up against the best of the best and The Wood Amp was the secret sauce everyone talked about. Bill is always searching for something new, he constantly runs into the thick of our day with “Hey guys! Check this out!” We can hardly get anything done! But what an amp! He nailed it to the wall with authority. Never stop, Bill! What we learned from that one of a kind amazing amp has been integrated into our newest model- the Opal. Bill likes to call the OPAL “the wireless amp”. The reason is this: he has removed 75 percent of the wire needed to run an amp of this complexity by wiring the components DIRECTLY to their destination. This would be equal to changing from a 45 foot cord to having your guitar hardwired to the input of your amp! Then think of what would happen inside an amp! YOU have to hear this amp! This amp is fast, articulate with no harshness, smooth without being wimpy. Wider dynamic range, more sensitivity, more TONE! A new enhanced active and buffered post-return tube effects loop that is intregal to the tone and response of the amp, you have to hear this! The OPAL is available in a limited quantity and only comes in a 50 watt 6L6GC 12AX7 format. Any deviations from this are a custom order and will be priced accordingly. The OPAL Brilliant, Fiery, Deep, Precious !!! Try one today.

50 Watt Head with Reverb 20.5”L x 11”H x 10.5” D, 34 lbs. Price: $4299
For more information download the Manual.
OPAL QUOTES FROM HAPPY CUSTOMERS….

“Mind Expanding Harmonic Overtones and Depth of Field”

“Complete Sensitivity! Listen to the Dynamic Range! This is what I’ve been searching for!”

“Wow! You guys have definitely hit a major bullseye! This is an amazing amp.”

” This is an extension of my guitar! This isn’t an amp; it’s an instrument itself! Unbelievable. ”

Overdrive Signature

The Overdrive Signature is truly a work of art, tonally speaking. Built on our long chassis platform with 100 watts, the OD Sig is a true performance amp. It’s preamp section is similar to the Custom Reverb Signature , but employs different control values for the EQ that are more open with greater sweeps. There’s additional negative feedback in the circuit, adding to the bloom. The sophisticated reverb circuit utilizes 3 tubes and features separate send and return controls for both the clean and lead channels. The lead channel on this amp is truly amazing, with the ability to go from a very smooth overdrive to a very aggressive lead tone (which tends to be a little more aggressive than the Custom Reverb Signature).

This amplifier’s clean channel incorporates many of the characteristics found in the Sterling Signature(limited production single channel clean amp, out of production), with the addition of a unique lead channel and the aforementioned separate reverb controls for both channels.

Quick Facts:

• 2 channel, cascading, SS Rectifier, 4 X 6L6, 100 watts.
• 4, 8, 16 ohm output, treble, middle, bass, bright, mid, deep, dual EQ settings, boost, gain and master each channel, contour control.
• Triple function LED footswitch for clean/lead, FET boost, and tone bypass.
• Accutronics all tube spring reverb with independent send and return controls for clean and lead channels.
• Buffered effects loop, FET stage in preamp with gain control, footswitchable.
• Special design transformers, individually selected components, each amp signed by Bill Krinard and Joe Mloganoski personally.
• Dimensions: 24″ L x 10.5″ D x 12″ H / Weight: 51Lbs.
• Price: $10,000. Standard cabinet is black tolex. Custom covering available at additional cost.

Ruby

At last, an amp for the tone purist-a no frills single channel tone machine! Classic rock tones, incredible chime and dynamics, complete overdrive control from your guitar’s volume knob. 2 El 34s, 35 watts, loads of gain and crunch-but we didn’t stop there. We added a master volume and effects loop-bypassable for the purist, or in circuit for fat lead tones at low volumes without a power soak, plus the ability to add delay, reverb, etc. to the mix!

Sapphire

See Emerald/Emerald Pro

Sapphire was essentially an Emerald, but 100 watts.

Sensor

Focused on the growing number of players who use effects. It provides Two-Rock’s acclaimed cleans, mixes a tighter, more aggressive overdrive channel, and adds a fully buffered tube effects loop that brings out the best in effects, including leading edge time-based effects. It also features cascading gain stages, independent contour controls, foot switchable expansion control, and a new, medium-sized chassis. 6V6 power tubes on 22W versions, 6L6 on all other models. Sensor combos come stock with 8 OHM Celestion Creamback speakers with optional 12-65B available, and Celestion G12-65 upgrade available on request.

Studio 50-15

The goal from the start of this design was to offer a performance level amplifier with dual power settings and a familiar layout. This amp offers the player the ability to take the amp to the studio, the stage or to the bedroom. With its simple yet effective front end, unique implementation of its effects loop and two stage power supply, this amp offers a full range of sonic characteristics. The Studio 50/15 includes a dual stage power selection switch on the front panel called “HIGH” and “LOW” power. In HIGH power mode, the amp is in its normal state and similar to other performance level Two-Rock amps. Operating at a full 50-watt output level, the amount of clean headroom is maximized. To start clipping of the output stage, you have to fully open up the preamp. This setting will instantly feel similar to any of our clean platforms and add to the nature of a “Modern Hi-Fi” sounding amplifier. In LOW power, the amp is running at a considerably lower level of output power. This lower level reduces the total output to 15 watts. This might lead to the misconception that the amp should be significantly quieter. While there might be a slight reduction in DB, the larger and more noticeable aspect of the low power setting will be headroom. This reduced headroom will lead to a lower volume “sweet spot” if the goal is “clean” output. In the low power mode with no change to volume, the amp will instantly feel and sound more vintage. As the amp is turned up, it will tend to have more artifacts around the notes. This is due in large part, to the output stage being driven into clipping and the amp feeling as if it can be pushed around more. The result is a bit less hi-fi.

Power settings This amp has a 50 and 15 watt power regulation. The low power setting regulates the tube to only allow 15 watts of power before clipping. In the high power mode, it allows a full 50 watts of output power before clipping. This decrease in power is not related to volume or attenuat ion. The low power settings allow you to overdrive the output section of the amp.

Features: Front Panel

Treble with pull Bright

Middle with pull Mid-boost (tone stack bypass),Bass with pull Deep • Gain • Master Volume • Three position Standby switch – 50 Watt (High Power) or 15 Watt (Low Power), or standby Features: Back Panel • Effects Loop Send jack • Effects Loop Send control – pull for active mode (engages buffer and level control) • Effects Loop Return Jack • Effects Loop Return control- pull for active mode (engages buffer and level control) • Dual 4 ohm, single 8 ohm and single 16 ohm speaker Jacks Available Configurations • Head • Combo with WGS 12-65B or optional Celestion G12-65 upgrade Weight and Dimensions • Head wt: 41 LBS | WxDxH: 20 5/8” x 12” x 10 1/2” • Combo wt: 59 LBS | WxDxH: 20 5/8” x 20” x 10 1/2”

Studio Pro 22/35

Our best-selling series, universally praised for its extraordinary clean headroom, dynamics, and a variety of tone shaping options. Best described as a “portable” Classic Reverb/Custom Clean hybrid, it includes an added pickup loading feature that optimizes balance between single coil and humbuckers. A stellar reverb circuit with Send and Return controls, contour control and full buffered effects loop is standard on this amp.

The new Pickup Loading feature control has 5 settings, from no additional pickup loading to full loading. Loading the guitar pickup(s) to varying degrees changes the impedance relationship between the pickup and the first gain stage. Loading reduces inductive “ringing” in the pickup coils. The effect is a more controlled high frequency response and a reduction in high frequency artifacts produced when a pickup’s magnets and coils feed back with each other, usually at or near the pickup’s saturation point. The damping effect also reduces gain, which is normal. Tonally speaking, reducing these artifacts results in a cleaner waveform and lack of harshness in the upper frequencies.

22 Specs:

Output Power: 22W

Tubes: 6V6 ONLY

Reverb: Tube Driven, Analog Spring w/Send and Return Controls

Dimensions: 15-5/8″ wide x 8-3/8″ tall x 10″ deep

Weight: 22 Pounds

Features: Pull Bright Control, Half Buffered Effects Loop (on the Return), Contour, Pickup Loading

35 Specs:

Output Power: 35W

Tubes: 6L6

Reverb: Tube Driven, Analog Spring w/Send and Return Controls

Dimensions: 15-5/8″ wide x 8-3/8″ tall x 10″ deep

Weight: 22 Pounds

Features: Pull Bright/Mid/Deep Controls, Half Buffered Effects Loop (on the Return), Contour, Pickup Loading

Studio Pro 50/100

Our best-selling series, universally praised for its extraordinary clean headroom, dynamics, and a variety of tone shaping options. Best described as a “portable” Classic Reverb/Custom Clean hybrid, it includes an added pickup loading feature that optimizes balance between single coil and humbuckers. A stellar reverb circuit with Send and Return controls, contour control and full buffered effects loop is standard on this amp.

The new Pickup Loading feature control has 5 settings, from no additional pickup loading to full loading. Loading the guitar pickup(s) to varying degrees changes the impedance relationship between the pickup and the first gain stage. Loading reduces inductive “ringing” in the pickup coils. The effect is a more controlled high frequency response and a reduction in high frequency artifacts produced when a pickup’s magnets and coils feed back with each other, usually at or near the pickup’s saturation point. The damping effect also reduces gain, which is normal. Tonally speaking, reducing these artifacts results in a cleaner waveform and lack of harshness in the upper frequencies.

Studio Pro Plus

Adds foot-switchable expansion control and tremolo to Two-Rock’s best selling Studio Pro series that is known for its extraordinary clean headroom. The new expansion control allows an adjustable EQ bypass to the clean channel. This expansion function increases the amount of gain on the front end. The package comes in a new medium-sized chassis, available in 22W-35W-50W combo and head with 6V6 power tubes on the 22W versions, 6L6 on all other versions. Combos come stock with 8 OHM Celestion Creamback speakers with optional 12-65B available, and Celestion G12-65 upgrade available on request.

22 Specs:

Head:

Output Power: 22W

Tubes: 6V6 ONLY

Dimensions: 18 5/8″ wide x 10 3/8″ tall x 10″ deep

Weight: 27 lbs

Features: Single channel Studio Pro platform and controls, Analog Spring Reverb with large reverb tank, Expansion control – foot switchable, Tube Tremolo feature – foot switchable, Pickup Loading feature

Combo:

Speakers: 1×12 – Celestion Creamback or WGS 1265B

Dimensions: 18 5/8″ wide x 20″ tall x 10 1/2″ deep

Weight: 42 lbs

35 Specs:

Head:

Output Power: 35W

Tubes: 6L6

Dimensions: 18 5/8″ wide x 10 1/2″ tall x 10″ deep

Weight: 27 lbs

Features: Single channel Studio Pro platform and controls, Analog Spring Reverb with large reverb tank, Expansion control – foot switchable, Tube Tremolo feature – foot switchable, Pickup Loading feature

Combo:

Speakers: 1×12 – Celestion G12-65

Dimensions: 18 5/8″ wide x 20″ tall x 10″ deep

Weight: 42 lbs

50 Specs:

Head:

Output Power: 50W

Tubes: 6L6

Dimensions: 20 5/8″ wide x 12″ tall x 10 1/2″ deep

Weight: 40 lbs

Features: Single channel Studio Pro platform and controls, Analog Spring Reverb with large reverb tank, Expansion control – foot switchable, Tube Tremolo feature – foot switchable, Pickup Loading feature

Suggested Speakers: Celestion G12-65

Combo:

Speakers: 1×12 – Celestion G12-65

Dimensions: 18 5/8″ wide x 20″ tall x 10 1/2″ deep

Weight: 55 lbs

Topaz

We are proud to introduce an affordable, hand built amp with NOS tubes, reverb, series/parallel effects loop and unparalleled performance! This versatile 2 channel amp will take you through the full range of tube tones- from clean to gritty, all the way to superb overdrive-and all the tonal nuance, sweetness and life that has made our amps famous the world over. Available in 50 or 100 watts! This amp is a direct descendant of our popular Emerald 50 and Emerald Pro amps, with our classic Two-Rock lead tone!

Clean Channel:
Our clean channel features unique circuitry designed to bring you the clearest, most bell like chimey tone you’ve ever heard. Push it a little by increasing the gain setting, and you transcend smoothly and seamlessly into the tastiest overdrive around.

Cut/Boost:
Contours designed specifically for guitar.

Bright Switch:
Enhances highs without sounding brash or tinny.

Mid Switch:
Boosts the mid range frequency response.

Deep Switch:
Not just a bass boost, but a true EQ shift feature which lifts the bottom and low mids. Great for jazz or to fill out single coils for rhythm work without changing basic tone settings.

Tone Bypass:
This feature acts as a mid boost and adds some gain. Great for pushing the clean channel into a slight overdrive. This feature is also foot-switchable, allowing four completely different tone and gain settings.

EQ Switch:
This switch allows you to choose between 2 completely different equalization settings. EQ1 is a lower gain setting, with extended midrange and bass available when used in conjunction with the middle and bass controls as well as the deep switch. This setting is suitable for any style requiring a pure clean tone with anice round bottom and plenty of clean headroom. EQ2 is a higher gain setting, allowing a greater signal level to pass to the lead channel. This setting is suitable for any style requiring a clean to slightly distorted tone in clean mode, and more gain in the lead mode.

Lead Channel:
What can we say? This is what everyone’s talking about. The clearest, sweetest overdrive, sustain and harmonics-fully adjustable from slight edge/gain/overtones to a more compressed but harmonically rich tone-never harsh. Internal tone controls allow you to tailor the EQ to your tastes. Our philosophy is to set the EQ to make the lead channel an extension of the clean channel: to allow the player to seamlessly move from clean & chimey to overdrive. “Touch” players will especially enjoy this, as you can get that great clean tone with a light touch, and then dig in hard to really make the amp talk. Kicking in the front end bypass adds more mids and gain, adding yet another tonal option in lead.

Spring Reverb:
Lush, large and sweet — as spring reverb should be.

Effects Loop:
Equipped with a series only loop, tube-buffered, designed to actively enhance any outboard effects. It is engaged even without effects plugged in, adding warmth and increasing the dynamic touch sensitivity our amps are known for.

Presence Control:
Increases the high end response.

Footswitch:
Our 2-way footswitch controls both the lead/rhythm channel switch and mid boost/bypass (fully independent). We use ultra-bright LEDs that can even be seen when playing outdoors in direct sunlight!

TS1 (Legacy 2009)

We were in the process of designing a new amp when Taku Sakashita’s life was taken tragically. He had always wanted to make an amp called the “Tone Secret,” so to honor this incredible man and world renowned luthier, we introduce the TS-1. This amp debuted live on May 23rd, 2010, with Robben Ford, Boz Scaggs, Volker Strifler, and Tuck & Patty at a benefit concert for the Sakashita foundation. See the video HERE

With exceptional cleans and articulate leads, this amp has been catching eyes left and right.

Product Specs

• 6L6 or EL34, 50 or 100 watt
• Exceptional clean head room
• Open, Articulate Leads
• NPODS (No Post OD Tonestack)
• Available in Standard Black or Blond Tolex
• RETAIL $5500 50 Watt / $6000 100 Watt